Efficient Networks 107-0001-000 - Manual (Page 104)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-34 Efficient Networks
®
system delsyslogfilter
Deletes the Syslog address filter. To see the address range of the filter, use the
command
system list . To define a new Syslog address filter, use the command
system system addsyslogfilter .
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Security (R/W)
Input Format
system delsyslogfilter <firstipaddr> [<last ipaddr>] | lan
Parameters
Response
Command prompt.
system delsyslogserver
Removes an address from the list of Syslog servers. To see the server addresses,
use the command
system list . To specify a new Syslog server address, use the
command system system addsyslogserver .
NOTE:
The new server address becomes effective after a save and a reboot command.
Mgmt Class
Network (R/W)
Input Format
system delsyslogserver <ipaddr>
<first ipaddr>
a
a
Dotted-decimal notation
First IP address of the range.
<last ipaddr> a Last IP address of the range.
b
b
May be omitted if the range contains only one IP address.
lan Local Ethernet LAN.