Dmt link, Mgmt class, Input format – Efficient Networks 107-0001-000 User Manual
Page 271: Parameters, Response, Dmt link -11
Chapter 7: WAN Interface Commands
Efficient Networks
®
Page 7-11
dmt link
Selects the link type for the ADSL DMT router. The link type is persistent across
reboots.
Normally, the CO and CPE negotiate the link type to be used. Use the dmt link
command when you do not want the CO and CPE to negotiate the link type, but
instead want to specify the type of data link required.
CAUTION:
This command forces the CPE into the specified mode. It is not for normal use.
Mgmt Class
Network (R/W)
Input Format
dmt link DEFAULT | T1_413 | G_DMT | G_LITE | MULTIMODE
Parameters
Response
Command prompt.
default
Default value. The CO and CPE negotiate the link type used.
T1_413
ANSI standard T1.413
G_DMT
G.dmt standard
G_LITE
ITU G.Lite standard
MULTIMODE
The CO and CPE negotiate the link type used.