Efficient Networks 107-0001-000 - Manual (Page 239)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-51
remote setmaxline
Sets the maximum links (1 or 2) for a DOD (dial on demand) connection, that is, a
connection where the link goes up and down. These links include those for ISDN,
L2TP tunnels, IPSec tunnels, and dial backup.
If you set the maximum links to 2, bandwidth on demand management determines
their actual usage; see the
remote setbwthresh command.
Mgmt Class
Network (R/W)
Input Format
remote setMaxLine 1 | 2 remotename>
Parameters
Response
Command prompt.
remote setmgmtipaddr
Assigns to the remote router entry, an IP address which is to be used for management
purposes only and not for IP address translation. This management IP address is
generally a private network address used solely by the ISP.
The management IP address is separate from the IP address used for IP address
translation. The IP address used for address translation is generally a public IP
address valid on the Internet. It is set by the
remote setsrcipaddr command.
NOTE:
The management address is not effective until after the next save and remote restart
or reboot .
1 | 2 Maximum number of links to be used for the connection (1 or 2).
The default is 1.
<remotename>
a
a
ASCII string
Name of the remote router.