Efficient Networks 107-0001-000 - Manual (Page 356)

Chapter 11: PPPoE Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 11-2 Efficient Networks
®
Parameters
Example
The following commands define the remote router used to connect to the PPPoE
service DialUpPPP.net. Note that the remote setPPPoEservice command is entered
immediately after the remote add command.
Response
Command prompt.
pppoe close
Closes a currently active PPPoE session. To see the currently active PPPoE
sessions, use the command
pppoe list .
Mgmt Class
Security (R/W)
Input Format
pppoe close <ifsnumber>
Parameters
Response
Command prompt.
<service>
a
a
ASCII string
Name of the PPPoE service to which this remote connects PPPoE
users. The service provider defines the name of its service.
b
b
Name is case-sensitive
* Specify * if the router can be used to connect to any PPPoE service.
- Specify - to clear the setting.
<remotename> a Name of the remote router.
-> remote add pppoeremote
-> remote setpppoeservice dialupppp.net pppoeremote
<ifsnumber> Session to be closed.
a
a
Specify the PPPoE/Ifs number for the session as shown in the ifs or pppoe list command output.