Efficient Networks 107-0001-000 - Manual (Page 269)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 7: WAN Interface Commands
Efficient Networks
®
Page 7-9
Parameters
Examples
The following command disables ATM traffic-shaping remote router HQ.
Assuming that the ATM link speed (upstream) is 200 Kb/s 471 cells/s and an average
upstream data rate of 20 Kbps (47 cells/s) is desired, you would issue the following
command:
If a constant bit rate (CBR) is required, use the following command:
Response
Command prompt.
<scr>
a
a
Integer
Sustained Cell Rate (cells per second).
<mbs> Maximum Burst Size (cells). For a constant bit rate (CBR), specify
1; for a variable bit rate (VBR), specify a value greater than 1.
<remotename>
b
b
ASCII string
Name of the remote router.
-> remote setATMTraffic 0 0 HQ
-> remote setATMtraffic 47 31 HQ
-> remote setATMtraffic 47 1 HQ