Efficient Networks 107-0001-000 - Manual (Page 259)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-71
remote unbindipvirtualroute
Removes a remote route from the named IP virtual routing table.
To list the remote routes, use the remote listiproutes command. To add a remote
route, use the remote remote bindipvirtualroute command.
NOTE:
A route change in an IP virtual routing table takes effect immediately. However, the
change is lost if it is not saved before the next remote restart or reboot.
Mgmt Class
Network (R/W)
Input Format
remote unbindipvirtualroute <ipaddr> <tablename> <remotename>
Parameters
Example
The following command removes a route from virtual routing table FRANCISCO. The
route removed is for IP address 10.1.2.0 and remote router HQ.
Response
Command prompt.
<ipaddr>
a
a
Dotted-decimal notation
IP address of the remote network or station.
<tablename>
b
b
ASCII string
IP virtual routing table to which the route is removed.
<remotename> a Name of the remote router.
-> remote unbindIPVirtualRoute 10.1.2.0 FRANCISCO HQ