Efficient Networks 107-0001-000 - Manual (Page 390)

Chapter 12: IKE/IPsec Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 12-32 Efficient Networks
®
Response
Typical response:
ike peers set address
Sets the IP address of the other endpoint of the secure IKE peer connection. The
address specified depends on the mode of the peer connection, which can be either
main mode or aggressive mode. (see “
IKE Management” on page 5-52. )
If the mode is main mode, the other endpoint of the peer connection is constant, and
you specify its IP address.
If the mode is aggressive mode, one end of the connection, the gateway, has a fixed
IP address. The other end, the client, has a changing address. When configuring the
client, set the peer IP address to the fixed gateway address. When configuring the
gateway for an aggressive mode connection, set the peer IP address to 0.0.0.0.
Mgmt Class
Security (R/W)
Input Format
ike peers set address <ipaddress> <peername>
-> ike peers list
IKE Peers:
IKE Peers:
my_aggresive_peer
IP address = 0.0.0.0
preshared secret = "confidential_hushhush"
aggressive, peer id = example.efficient.com (Domain name)
local peer id = test.efficient.com (Domain name)
my_main_peer
TP address = 1.2.3.4
preshared secret = "Shipsailsatmidnight"
main mode