Efficient Networks 107-0001-000 - Manual (Page 459)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 17: SNMP Commands
Efficient Networks
®
Page 17-3
Input Format
snmp addsnmpfilter <first ip addr> [<last ip addr>] | lan
Parameters
Response
Command prompt.
snmp addtrapdest
Adds the IP address for a SNMP Trap manager. To view the existing trap addresses,
use the command
snmp list . For additional information on SNMP, see “ SNMP” on
page 7-2.
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp addstrapdest <ip addr>
Parameters
Response
Command prompt.
<first ipaddr>
a
a Dotted-decimal notation
First IP address of the client range.
<last ipaddr> a Last IP address of the client range.
b
b May be omitted if the range contains only one IP address.
lan Local Ethernet LAN.
<ipaddr>
a
a Dotted-decimal notation
IP address of the trap manager.