Efficient Networks 107-0001-000 - Manual (Page 157)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 5: Ethernet Interface Commands
Efficient Networks
®
Page 5-19
Input Format
eth ip disable
Parameters
None
Response
Command prompt.
eth ip enable
Enables IP routing across the Ethernet LAN. This command acts as a master switch
allowing you to re-enable all IP routing.
NOTE:
This command requires a save and reboot before it takes effect.
Mgmt Class
Network (R/W)
Input Format
eth ip enable
Parameters
None
Response
Command prompt.