Efficient Networks 107-0001-000 - Manual (Page 244)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-56 Efficient Networks
®
Parameters
Response
Command prompt.
remote setpasswd
Sets the CHAP or PAP authentication password that is used when the remote router
establishes a connection or is challenged by the target router.
Mgmt Class
Security (R/W)
Input Format
remote setpasswd <password> <remotename>
Parameters
Response
Command prompt.
remote setphone
Specifies the phone number to be used for the dial on demand (DOD) connection,
that is, a connection where the link goes up and down. These links include those for
ISDN, L2TP tunnels, IPSec tunnels, and dial backup.
For dial backup, the phone number is used when dialing out using the backup V.90
modem connected to the console port. You may specify both a primary number and
an alternative phone number. For more information on the Dial Backup option, see
“
Dial Backup” on page 6-7.
<password>
a,b
a
ASCII string
b
The name is case-sensitive and its maximum length is 255 characters.
System name of the target router.
<remotename> a Name of the remote router.
<password>
a,b
a
ASCII string
b The password is case-sensitive and its maximum length is 40 characters.
Authentication password of the remote router.
<remotename>
a Name of the remote router.