Efficient Networks 107-0001-000 - Manual (Page 337)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 9: L2TP Commands
Efficient Networks
®
Page 9-7
l2tp list
Provides a complete display of the current configuration settings for tunnel(s), except
for the authentication password/secret.
Mgmt Class
Security (R)
Input Format
l2tp list |<tunnelname>|
Parameters
Response
Typical response:
<tunnelname>
a
a ASCII string
Name of the tunnel.
b
b The name is case sensitive.
-> l2tp list
INFORMATION FOR <pacingAtWork>
type .............................. L2TPClient (LAC-will not dial)/LNS
All Incoming Calls Tunneled here..... no
CHAP challenge issued.............. yes
hidden AVPs used................... yes
sequencing/pacing.................. window pacing
sequencing/pacing is.............. required
window size for sequencing/pacing. 10
ip address......................... 10.0.0.1
Our host name...................... pacingAtHome
ACTIVE TUNNEL...................... UNKNOWN
current state..................... CLOSED
LOCAL TUNNEL ID................... 1
REMOTE TUNNEL ID.................. 0
remote firmware................... 0
remote ip address................. 10.0.0.1
LAC SESSION serial number......... 0
current state.................... CLOSED
LOCAL CALL ID.................... 1
local window size............... 10
sequencing/pacing............... WINDOW/PACING
sequencing/pacing is........... required
REMOTE CALL ID................... 0
remote window size.............. 0