Efficient Networks 107-0001-000 - Manual (Page 307)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 8: DHCP Commands
Efficient Networks
®
Page 8-1
CHAPTER 8
CHAPTER 8
DHCP COMMANDS
The following DHCP (Dynamic Host Configuration Protocol) commands allow you to:
• Enable and disable subnetworks and client leases.
• Add subnetworks and client leases.
• Set the lease time.
• Change client leases manually.
• Set option values globally, for a subnetwork, or for a client lease.
• Enable/disable BootP.
• Use BootP to specify the boot server.
• Define option types.
The DHCP commands described in this section are included in Table 8-1, “DHCP
Command Listing” . To read about DHCP concepts and the DHCP configuration
process, see “DHCP (Dynamic Host Configuration Protocol)” on page 4-2 of the
Technical Reference Guide.
Table 8-1: DHCP Command Listing
Command Function
dhcp ? Lists the supported DHCP keywords.
dhcp add Provides one of three types of DHCP definitions:
subnetwork, client lease, or option type.
dhcp addrelay Adds an address to the DHCP relay list.
dhcp bootp allow Allows a BootP request to be processed for a par-
ticular client or subnet.
dhcp bootp disallow Denies processing of a BootP request for a partic-
ular client or subnet.
dhcp bootp file Specifies the boot file name (kernel) and the sub-
net to which it applies.