Shdsl save, Mgmt class, Input format – Efficient Networks 107-0001-000 User Manual
Page 301: Parameters, Response, Shdsl speed, Shdsl save -41 shdsl speed -41
Chapter 7: WAN Interface Commands
Efficient Networks
®
Page 7-41
shdsl save
Saves SHDSL configuration changes across restarts and reboots.
Mgmt Class
Network (R/W)
Input Format
shdsl save
Parameters
None
Response
Command prompt.
shdsl speed
Manages the speed of the SHDSL line.
NOTE:
By default, it is assumed that the router is Customer Premises Equipment (CPE) and
the line speed desired is the maximum allowed by the central office (CO).
This command can:
•
Display the current requested speed and actual speed (shdsl speed with no
parameter).
•
If the actual speed shown is 0 (zero), the line is down.
•
Manually set the speed (shdsl speed <speed>) (You might request a lower
speed to improve stability.)
•
Select auto-speed detection (shdsl speed auto). You should then restart the
WAN interface with the command shdsl restart.
NOTE:
A speed change automatically restarts the G.shdsl WAN interface. To make any
changes persistent, perform a