Efficient Networks 107-0001-000 - Manual (Page 364)

Chapter 12: IKE/IPsec Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 12-6 Efficient Networks
®
ike commit
Determines whether the IKE commit bit is set. By default, the commit bit is not set
(off).
If packets are not being processed correctly across an IPSec tunnel, try the command
i
ke commit on so that the commit bit is set. Setting the commit bit makes sure that
no IPSec traffic arrives at the router before the router is ready for it.
Mgmt Class
Security (R/W)
Input Format
ike commit [ on | off | help]
Parameters
Response
Command prompt.
ike flush
Clears all IKE configuration information from the router. For more information about
IKE, see “
IPSec (Internet Protocol Security)” on page 5-50.
Mgmt Class
Debug (R/W)
Input Format
ike flush
Parameters
None
Response
Command prompt.
*** When entered with no parameter, the current value is displayed.
on Commit bit is set.
off Commit bit is not set. (Default value)
help Displays help message.