Efficient Networks 107-0001-000 - Manual (Page 212)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-24 Efficient Networks
®
Parameters
Response
Command prompt.
<action> One of the following command actions:
<ipaddr>
a
a Dotted-decimal notation
Selects the host with this IP address as server.
discard Discards the incoming server request.
me Sends the incoming server requests to the local
router, regardless of the IP address.
<protocol> Protocol used by the selected server.
<protocolid>
b
b
Integer
Numerical protocol ID.
tcp TCP only.
udp UDP only.
all All protocols.
<first port> First or only port as seen by the remote end. Port used by the se-
lected server.
<portid>
c
c
Integer, 0 - 65,535
Numerical port value; a value of 0 matches any
port.
ftp File Transfer Protocol (FTP) port.
h323 H.323 port.
http Hypertext Transfer Protocol (HTTP) port.
smtp Simple Mail Transfer Protocol (SMTP) port.
sntp Simple Network Management Protocol (SNMP)
port.
t120 T.120 port.
telnet Telnet port.
tftp Trivial File Transfer Protocol (TFTP) port.
all All ports.
<last port> Optional last port in the range of ports as seen by the remote end
for the server on the LAN.
<first pri-
vate port> c
If specified, this is a port remapping of the incoming requests from
the remote end.