Efficient Networks 107-0001-000 - Manual (Page 152)

Chapter 5: Ethernet Interface Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 5-14 Efficient Networks
®
eth ip delhostmapping
Undoes an IP address/ host translation (remapping) range that was previously
established with the command
eth ip addhostmapping on a per-interface basis. For
more information, see “ Host Remapping” on page 4-23 of the Technical Reference
Guide.
Mgmt Class
Network (R/W)
Input Format
eth ip delhostmapping <first private addr> <second private
addr> <first public addr> <interface>
Parameters
Example
Typical usage:
Response
Command prompt.
<first public addr>
a
a Dotted-decimal notation
First IP address of the range of IP addresses.
<second public addr> a Last IP address of the range of IP addresses.
<first public addr> a Defines the range of public IP addresses. The rest of the
range is computed automatically.
<interface>
b,c
b
This parameter may be omitted if the router has only one Ethernet interface.
If the router has two physical Ethernet interfaces (an Ethernet hub router), the port number (0 or 1) must
be specified.
c To specify a logical interface other than logical interface 0, specify both the port number and the logical
interface number (<port #>:<logical #>, for example, 0:1).
Defines the target Ethernet interface.
-> eth ip delHostMapping 192.168.207.40 192.168.207.49 10.0.20.11 1