Efficient Networks 107-0001-000 - Manual (Page 93)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-23
system backup pingsamples
Changes the number of ping samples for a group, that is, the number of pings
performed for each address in the group.
To see the current ping sample values, use the system list command. For more
information about ping samples and Dial Backup, see ” Addresses to Ping” on page 6-
12 of the Technical Reference Guide.
NOTE:
If you change the ping samples value to 0, you disable pinging for that group of
addresses.
Mgmt Class
Network (R/W)
Input Format
system backup pingsamples <samples> [<group>]
Parameters
Examples
The following command changes the number of ping samples to 10 for addresses in
group 0.
The following command disables the pinging of addresses in group 1.
Response
Command prompt.
<samples>
a
a
Integer, (6)
Number of times the addresses in the group are pinged.
<group>
b
b
integer, 0 - 65535 (0)
Optional, number of a group.
-> system backup pingsamples 10
-> system backup pingsamples 0 1