Efficient Networks 107-0001-000 - Manual (Page 197)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-9
remote addiproute
Adds an IP address route to a network or station on the LAN connected beyond the
remote router. The route is added to the default routing table.
The local router’s routing table must be seeded statically to access networks and
stations beyond this remote router. After the connection is established, standard RIP
update packets can dynamically add routes to the routing table. Setting this address is
not required if the local router never connects to the remote router and the remote
router supports RIP.
NOTE:
Changes to the default routing table require a save and a remote restart or reboot
before they take effect.
Mgmt Class
Network (R/W)
Input Format
remote addIpRoute <ipaddr> <ipnetmask> <hops> [<ipgateway>]
<remotename>
Parameters
<ipaddr>
a
a Dotted-decimal notation
IP address of the remote network or station.
<ipnetmask> a IP network mask of the remote network or station.
<hops>
b
b
Integer, 1 - 15
Perceived cost to reach the remote network or station by
this route.
<ipgateway> a Address of a router on the remote LAN. Enter a gateway
only if configuring a MER interface. Check with your sys-
tem administrator for details
<remotename>
c
c
ASCII string
Name of the remote router.