Telnet session for remote access, Step2 start a telnet session, B. in the run dialog box (or shell) window, enter – Efficient Networks 107-0001-000 User Manual
Page 29: C. click ok, or press <enter, Telnet session for remote access -7
Efficient Networks
®
Page 1-7
Telnet Session for Remote Access
From the local area network you can use TELNET to login in using the Ethernet IP
address. (For more information, see Telnet Remote Access.)
NOTE:
Remote access to the router configuration can be disabled or restricted. For further
information, see “
Controlling Remote Management” on page 5-15.
Step 1
Make sure that your PC and router addresses are in the same subnetwork. For
example, the router address could be 192.168.254.254 and the PC address could be
192.168.254.253.
Step 2
Start a TELNET session.
a.If you are using a PC running Windows“ 95/98/NT“, select Start > Run. If on a
UNIX system, bring up a shell window.
b.In the Run dialog box (or shell) window, enter:
telnet 192.168.254.254
c.Click OK, or press <Enter>.
Step 3
A TELNET window will be launched; a line identifying the router will be displayed,
followed by the Login: prompt as shown below.
Task Complete
Efficient 5950 G.SHDSL [ATM] Router (5950-001)Ready
Username: