Efficient Networks 107-0001-000 - Manual (Page 95)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-25
system backup stability
Changes the Dial Backup stability period. The stability period guards against frequent
switching back and forth between the DSL link and the backup port. For more
information about the Dial Backup stability period, see ”
Stability Period” on page 6-11
of the Technical Reference Guide.
To see the current stability value, use the system list command.
Mgmt Class
Network (R/W)
Input Format
system backup stability <minutes>
Parameters
Examples
The following command changes the stability period to 5 minutes.
Response
Command prompt.
system backup successrate
Changes the minimum success rate required for a group of pinged addresses. If the
success rate is less than the minimum, the DSL link is assumed to have failed and a
switchover to the backup is performed.
NOTE:
If you change the success rate to 0, you disable pinging for that group of addresses.
NOTE:
A minimum success rate of 100% is not recommended; this would require a reply
from every ping sent.
<minutes>
a
a
Integer, 1 - 60 (3)
Number of minutes in the stability period.
-> system backup stability 5