Efficient Networks 107-0001-000 - Manual (Page 74)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-4 Efficient Networks
®
system name Sets or changes the name of the local router being
configured.
system onewandialup Can force the router to have no more than one re-
mote connection active at a time.
system passwd Sets the system authentication password for the
target router that is used when the router connects
to other routers or is challenged by them.
system riptimer Sets the duration for RIP information to be ex-
changed with remote routers.
system securemode list Displays the current secure mode configuration
values and the number of concurrent Telnet and
SSH sessions allowed.
system securemode set Enables and disables the secure mode function.
system securemode set cli Sets the number of concurrent Telnet and SSH
sessions the system will allow.
system securemode set lan Allows discrete control of the secure mode for the
LAN interface.
system securemode set wan Allows discrete control of the secure mode for the
WAN interface.
system securitytimer Allows the user to change the 10-minute default
security timer to another value.
system selnat addpolicy Adds a Selective NAT policy.
system selnat delpolicy Deletes a Selective NAT policy.
system selnat list Lists the current Selective NAT policies.
system snmpport Manages SNMP port access.
system sshport Manages SSH port access.
system supporttrace Provides the ability to capture all configuration data
to a file for troubleshooting.
system syslogport Manages Syslog port access.
system telnetport Manages the built-in Telnet server port access.
system wan2wanforwarding Allows management of WAN-to-WAN forwarding
of data from one WAN link to another.
Table 4-1: System Command Listing (Cont.)
Command Function