Efficient Networks 107-0001-000 - Manual (Page 136)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-66 Efficient Networks
®
Parameters
Examples
Response
Command prompt.
system telnetport
This command manages the built-in Telnet server port access. It can:
• Disable Telnet port for this router (sets the Telnet port to 0).
• Request the default Telnet port (23). This re-enables Telnet port after it is
disabled.
• Redefine the Telnet port.
NOTE:
This command requires a save and reboot to take effect.
To see the current setting, use the system list command.
Mgmt Class
Network (R/W)
Input Format
system telnetport default | disabled | <port>
default Restores the port value to the default value 514 and re-enables the port.
disable Disables the existing Syslog port.
<port>
a
a Integer
Defines a new Syslog port number. Use this option to restrict remote ac-
cess.
This command sets the Syslog port to the default value (514).
-> system syslogport default
This command disables the existing Syslog port.
-> system syslogport disabled
This command remaps the syslog port to port 154.
-> system syslogpport 154