Efficient Networks 107-0001-000 - Manual (Page 246)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-58 Efficient Networks
®
remote setpppoptions
Enables and disables a PPP option.
The default settings vary with the option. To see the current settings of the PPP
options, use the command
remote list .
Mgmt Class
Network (R/W)
Input Format
remote setpppoptions <option> on | off <remotename>
Parameters
Example
The following command forces the router to always request a new IP address
whenever the PPP session is terminated. (This could be useful if the other PPP
system does not completely support IP address negotiation.)
Response
Command prompt.
<option> Specify one of the following options:
compression Van Jacobson compression of TCP/IP headers (RFC 1144),
also known as IPCP compression.
ipslavemode Always accept peer proposal for our WAN IP address.
lcpecho Use periodic echo (if permanent interface or PPPoE).
reacqipaddr Try to reacquire the IP address. Turn this option off if the rout-
er should always request a new IP address when the PPP
session is terminated.
ripsap Use IPX RIP/SAP protocols.
on | off Desired setting for the option.
<routername>
a
a
ASCII string
Name of the remote router
-> remote setpppoptions reacqipaddr off HQ