Efficient Networks 107-0001-000 - Manual (Page 292)

Chapter 7: WAN Interface Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 7-32 Efficient Networks
®
sdsl preact
Displays and/or changes the autobaud pre-activation status.The default status is on.
However, to be effective, autobaud pre-activation must also be enabled at the Central
Office (CO) end of the connection.
NOTE:
Remember to enter an sdsl save or save command to save SDSL changes across
restarts and reboots.
For more information on the autobaud feature, see Auto-baud preactivation.
Mgmt Class
Network (R/W)
Input Format
sdsl preact [on | off]
Parameters
Response
SDSL preactivation status is displayed.
on Enables pre-activation at the customer premises equipment
(CPE) end.
a
a To be effective, pre-activation must also be enabled at the CO end.
off Disables pre-activation.
Preactivation enabled
Preactivation disabled