Efficient Networks 107-0001-000 - Manual (Page 250)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-62 Efficient Networks
®
remote setprotocol
Sets the link protocol for the remote router.
NOTE:
The link protocol and encapsulation option must match those at the other end of the
connection (the settings in the DSLAM).
The encapsulation options are described in “Encapsulation Options” in Chapter 2 of
the Technical Reference manual.
Mgmt Class
Network (R/W)
Input Format
remote setProtocol PPP | PPPLLC | RFC1483 | RFC1483MER | FRF8
| RAWIP <remotename>
Parameters
Response
Command prompt.
ppp PPP protocol with VC multiplexing encapsulation.
ppplc PPP protocol with LLC SNAP encapsulation (used with frame
relay internetworking units).
rfc1483 RFC 1483 protocol.
rfc1483mer RFC 1483MER (MAC Encapsulated Routing) protocol.
fr8 This protocol implements ATM to frame relay as defined in the
Frame Relay Forum FRF.8 Interworking Agreement.
rawip RawIP protocol.
<remotename>
a
a ASCII string
Name of the remote router.