Efficient Networks 107-0001-000 - Manual (Page 423)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 13: Voice Commands
Efficient Networks
®
Page 13-9
voice refreshcas
Defines the mode in which refresh CAS (channel associated signalling) cells will be
sent to the voice gateway.
NOTE:
A mode change is effective immediately. However you must perform a save command
if the change is to be persistent across reboots.
Mgmt Class
Voice (R/W)
Input Format
voice refreshcas active | always
Parameters
Example
The following command example will change the refresh cas mode to always.
The following command example entered with no parameters to display the current
mode.
Response
Command prompt.
*** When entered with no parameter, the current mode is displayed
active CAS refresh signals are sent only when voice is present. Default
mode.
always CAS refresh signals are sent both when voice is present and during
an idle state.
-> voice refreshcas always
-> voice refreshcas
Refresh CAS signaling is currently "always".