Efficient Networks 107-0001-000 - Manual (Page 261)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 7: WAN Interface Commands
Efficient Networks
®
Page 7-1
CHAPTER 7
CHAPTER 7
WAN INTERFACE COMMANDS
This chapter contains subsections of commands applicable to specific WAN
interfaces. The subsections are:
• ADSL (Asymmetric Digital Subscriber Line) commands, see ADSL
Commands .
• ADSL, Annex B commands, see GTI Commands .
• ATM (Asynchronous Transfer Mode) commands, see ATM Commands .
• DMT (Discrete Multi-Tone) commands, see DMT Commands .
• Dual-Ethernet commands, see Dual-Ethernet Router (ETH) Commands .
• Frame Relay commands, see Frame Commands .
• HDSL (High-speed Digital Subscriber Line) commands, see HDSL
Commands .
• IDSL (ISDN Digital Subscriber Line) commands, see IDSL Commands .
• SDSL (Symmetric Digital Subscriber Line) commands, see SDSL
Commands .
• G.shdsl commands, see SHDSL Commands .
NOTE:
If you are unsure which set of commands is applicable to your system, enter a ? at the
command prompt and look for one of the WAN interface key words listed in the top-
level command listing. The response, for example sdsl or adsl, indicates the
appropriate command set to use.