Efficient Networks 107-0001-000 - Manual (Page 128)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-58 Efficient Networks
®
2BC5A0B4 DHV ... 960 bytes .. ok.
DSP DAT ... 28 bytes .. ok.
USER BAT ... 462 bytes .. ok.
41DB833E DHV ... 960 bytes .. ok.
EF2E6B8F GAN ... 192 bytes .. ok.
35B2A0B5 GAN ... 192 bytes .. ok.
35B2A0B5 DHV ... 960 bytes .. ok.
EF2E6B8F DHV ... 960 bytes .. ok.
2D4E5524 GAN ... 192 bytes .. ok.
2D4E5524 DHV ... 960 bytes .. ok.
FILTER DAT ... 1284 bytes .. ok.
KERNEL F2K ... 684629 bytes .. ok.
2807 fat(s) used, 590 fat(s) free
0 fat(s) unused, 0 fat(s) unreferenced, 2 fat(s) reserved
1437184 bytes used by files, 14848 bytes by tables, 302080 bytes free
=== SYSTEM ===
GENERAL INFORMATION FOR <>
System started on.................. 5/17/2001 at 17:49
Authentication override............ none
WAN to WAN Forwarding.............. yes
Block NetBIOS Default.............. no
BOOTP/DHCP Server address.......... none
Telnet Port........................ default (23)
Telnet Clients..................... all
SNMP Port.......................... default (161)
SNMP Clients....................... all
HTTP Port.......................... default (80)
HTTP Clients....................... all
Syslog Port........................ default (514)
Allowed Syslog Servers............. all
Default Syslog Servers............. none
System message:
Security timer..................... 10 minutes
One WAN Dial Up.................... no
Management feature................. 0
Rip timer.......................... 45
Backup............................. no (no valid remote profile is enabled)
Retry Interval In Minutes........ 30
Stability Interval In Minutes.... 3
MODEM STRINGS: