Efficient Networks 107-0001-000 - Manual (Page 419)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 13: Voice Commands
Efficient Networks
®
Page 13-5
dsp provision
Sets the signalling the method in which phone lines (or trunks) are seized and
released.
Mgmt Class
Voice (R/W)
Input Format
dsp provision <port> <loop | ground>
Parameters
Example
The following command example will configure voice port 4 for ground start.
Response
Typical response when entered with no parameters:
Typical response when configuration has been changed:
*** When entered with no parameter, the current configuration is dis-
played
<port>
a
a
Integer, 1 - 4 (or 1 - 8 for 8-port IADs)
Voice port to configure.
b
b
When command is entered with <port> and no method <loop | ground>, the current port configuration
is displayed.
loop Sets voice signalling method to loop start
ground Sets voice signalling method to ground start
-> dsp provision 4 ground
-> dsp provision
[ 1]: Loop Start
[ 2]: Loop Start
[ 3]: Loop Start
[ 4]: Loop Start
-> dsp provision 4 ground
[ 4]: Ground Start