Efficient Networks 107-0001-000 - Manual (Page 117)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-47
Response
Command prompt.
system securemode list
Displays the current secure mode configuration values and the number of concurrent
Telnet and SSH sessions allowed.
Mgmt Class
Security (R)
Input Format
system securemode list
Parameters
None
Response
A typical response is shown below.
system securemode set
Enables and disables secure mode. When secure mode is enabled, management
access of the system is allowed only through secure channels for untrusted
interfaces. For more information, refer to ”
Secure Mode Access” on page 5-18 of the
Technical Reference Guide.
Mgmt Class
Security (R/W)
Input Format
system securemode set <enable | disable>
Secure Mode is currently "ENABLED".
WAN interface is currently "UN-TRUSTED".
LAN interface is currently "TRUSTED".
System CLI limit set to 7.