Efficient Networks 107-0001-000 - Manual (Page 176)

Chapter 5: Ethernet Interface Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 5-38 Efficient Networks
®
Mgmt Class
Network (R/W)
Input Format
eth restart <interface>
Parameters
Response
Command prompt.
eth start
Starts a stopped logical Ethernet interface. To read about logical Ethernet interfaces,
see “
IP Subnets” on page 6-1 of the Technical Reference Guide.
A logical Ethernet interface is stopped using the command eth stop . To stop and
immediately restart a logical Ethernet interface, use the command eth restart .
Mgmt Class
Network (R/W)
Input Format
eth start <interface>
Parameters
Response
Command prompt.
<interface>
a,b
a Integer, 0, 1 or it may be omitted if the router has only 1 Ethernet interface.
b To specify a logical interface other than logical interface 0, specify both the port number and
the logical interface number (<port #>:<logical #>, for example, 0:1).
Logical Ethernet interface.
<interface>
a,b
a
Integer, 0, 1 or it may be omitted if the router has only 1 Ethernet interface.
b To specify a logical interface other than logical interface 0, specify both the port number and
the logical interface number (<port #>:<logical #>, for example, 0:1).
Logical Ethernet interface.