Efficient Networks 107-0001-000 - Manual (Page 224)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-36 Efficient Networks
®
remote listbridge
Lists the current bridge settings for the specified remote router entry.
Mgmt Class
Network (R/W)
Input Format
remote listbridge <remotename>
Parameters
Response
Typical response when entered with no <remotename> parameter:
Exchange spanning tree with dest... no
TX Encryption........................ unknown
RX Encryption........................ unknown
mtu.................................. 1500
*** If entered with no parameters, bridge settings for all re-
mote routers entries are listed.
<remotename>
a
a
ASCII string
Name of the remote router.
-> rem listbridge
BRIDGING INFORMATION FOR <internet>
Bridging enabled..................... yes
Exchange spanning tree with dest... no
Bridge only PPPoE with dest........ no
BRIDGING INFORMATION FOR <efficient>
Bridging enabled..................... yes
Exchange spanning tree with dest... no
Bridge only PPPoE with dest........ no
Mac addresses that dial remote..... none