Efficient Networks 107-0001-000 - Manual (Page 392)

Chapter 12: IKE/IPsec Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 12-34 Efficient Networks
®
Parameters
Example
Response
Command prompt.
ike peers set localidtype
Sets the type of the local ID for the IKE peer connection. This command is used only
when aggressive mode has been selected by the
ike peers set mode command for
this peer name.
The local ID type must match the peer ID type on the other end of the connection. The
possible ID types are IP address, domain name, or e-mail address. For more
information, see “
IKE Peer Commands” on page 5-56.
Mgmt Class
Security (R/W)
Input Format
ike peers set localidtype <ipaddr | domainname | email>
<peername>
<aggressivemodeid> IP address
a
, domain name
b
, or e-mail address.
a
Dotted-decimal notation, ASCII string
b
ASCII string
<peername> b Name of the IKE peer whose local ID is specified.
c
c
To see the peer names, use the ike peers list command.
-> ike peers set localid test.efficient.com my_aggressive_peer