Honeywell UDC2500 - Manual (Page 165)

Output Calibration
4/07 UDC2500 Universal Digital Controller Product Manual 151
6 Output Calibration
6.1 Overview
Introduction
This section describes the field calibration procedures for the following types of outputs:
• Current Output
• Auxiliary Output
What's in this section?
The following topics are covered in this section.
TOPIC See Page
6.1 Overview 151
6.2 Current Output Calibration 152
6.3 Auxiliary Output Calibration 154
6.4 Restore Output Factory Calibration 156
WARNING—SHOCK HAZARD
OUTPUT CALIBRATION MAY REQUIRE ACCESS TO HAZARDOUS LIVE CIRCUITS, AND
SHOULD ONLY BE PERFORMED BY QUALIFIED SERVICE PERSONNEL. MORE THAN
ONE SWITCH MAY BE REQUIRED TO DE-ENERGIZE UNIT BEFORE CALIBRATION.