Setting a password, Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 100
Operating Instructions
Administrator Reference
100
Setting a Password
AAAA
Run SmartNetMonitor for Admin.
BBBB
Click the
[
Group
]
menu, point to
[
Search Device
]
, and then select
[
TCP/IP
]
or
[
IPX/SPX
]
.
A list of printer appears.
Note
❒
Select the protocol of the printer you want to change its configuration.
CCCC
On the list, Select a printer you want to change its configuration.
DDDD
From the
[
Tools
]
menu, select
[
NIB Setup Tool
]
.
The NIB Setup Tool starts up.
Note
❒
To prevent the Network Interface Board configuration from being changed accidentally by some-
one other than the network administrator, you can set a password in [
NIB Setup Tool
] that is dif-
ferent from the network password. Click [
Option
] to set a password in [
NIB Setup Tool
].
EEEE
Select
[
Property Sheet
]
, and then click
[
OK
]
.
FFFF
Click the
[
Password
]
tab.
GGGG
Click
[
Change Password
]
, and enter a password, and then click
[
OK
]
.