Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 41
Operating Instructions
Administrator Reference
41
Standard TCP/IP Port
A Click
[
Add
]
.
B Select
[
Standard TCP/IP
]
, and then click
[
OK
]
.
C Click
[
Next
]
in the "Add Standard TCP/IP Printer Port Wizard" window.
D Type the printer name or IP address in the "Printer Name or IP Address" box.
E Click
[
Finish
]
in the "Add Standard TCP/IP Printer Port Wizard" window.
LPR Port
A Click
[
Add
]
.
B Select
[
LPR Port
]
, and then click
[
OK
]
.
C Type the printer's IP address in the "Name or address of server providing lpd" box.
D Type "lp" in the "Name of printer or print queue on that server" box, and then click
[
OK
]
.
JJJJ
Make sure the location for the selected printer is shown after
[
Port:
]
.
KKKK
Double-click
[
Shared
]
to display the shared settings.
LLLL
To share the printer, check the left side of the
[
Shared
]
box.
MMMM
Click the box under
[
Shared name
]
to install the alternative driver for the necessary system.
Note
❒
Check [
Shared
] to start installation of an alternative driver ([
Windows NT 4.0/2000
], [
Windows 95/98
])
has already been selected.
❒
You can add an alternative driver after installation. See