Ricoh MIB-II - Manual (Page 83)

Operating Instructions Administrator Reference
83
NetWare 4.x, 5 - Advanced Settings
The actual procedures for configuring the printer differ depending on whether the Network Interface
Board is configured as a print server or as a remote printer. This section describes how to configure it
in the NetWare 4.x, 5 environment.
❖ ❖ ❖ ❖ To use NetWare 5
• If you use Pure IP, use the printer as a print server. You cannot use the printer as a remote printer
when you use Pure IP.
• If you use Pure IP, configure the printer to use the TCP/IP protocol. For more information about
how to make the settings, see
p.71 “Configuring the NetWare Protocol using the Control Panel” .