Using pure ip in the netware 5 environment, Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 86
Operating Instructions
Administrator Reference
86
JJJJ
After confirming the settings, click
[
Next
]
.
The settings take effect, and the NIB Setup Tool exits.
KKKK
Exit SmartNetMonitor for Admin.
LLLL
Turn the printer power off and on.
Note
❒
To confirm that the printer is configured correctly, type the following from the command prompt.
F:> NLIST USER /A/B
❒
If the printer works as configured, the name of the print server appears as an attached user.
Using Pure IP in the NetWare 5 Environment
AAAA
Log on to the file server as Admin or an Admin equivalent.
BBBB
Run SmartNetMonitor for Admin.
CCCC
Click
[
Property Sheet
]
, and then click
[
OK
]
.
The
[
NIB Setup Tool
]
dialog box appears.
DDDD
Click the
[
NetWare
]
tab, and make the following settings.
A In the
[
Print Server Name:
]
box, type the name of the print server.
B In the
[
File Server Name:
]
box, type the name of the file server in which a print server is to
be created.
By clicking
[
Browse
]
, you can select a file server among those listed in the
[
Browse File Server
]
dialog box.