Ricoh MIB-II - Manual (Page 234)

Operating Instructions Administrator Reference
234
EEEE
Click TCP/IP.
FFFF
Set WINS to active and enter the IP address of the WINS server in Primary WINS Server and
Secondary WINS Server.
GGGG
Click Refresh.
HHHH
Exit the Web browser.
Using telnet
AAAA
Connect to the remote printer using telnet.
BBBB
Use the set command to make WINS active.
msh> set wins on
CCCC
Specify the IP addresses (primary and secondary) using the following commands.
msh> wins primary Ipaddress
msh> wins secondary Ipaddress
Note
❒ To confirm the current configuration, use the show command.
DDDD
Log out from telnet.