Ricoh MIB-II - Manual (Page 72)

Operating Instructions Administrator Reference
72
CCCC
Press the {{{{Enter #}}}} key.
The following message appears on the panel display.
DDDD
Press the
{{{{U U U U}}}} or {{{{T T T T}}}} key to display "Network Setup".
EEEE
Press the {{{{Enter #}}}} key.
The following message appears on the panel display.
FFFF
Select the NetWare protocol.
Note
❒ All protocols are active by the default.
❒ Do not select protocols that are not used on your network.
❒ If you use Pure IP on NetWare 5.1, configure the printer to active the TCP/IP protocol.
Host Interface:
I/O Buffer
Host Interface:
Network Setup
Network Setup:
IP Address