Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 110
Operating Instructions
Administrator Reference
110
NetBEUI
A Click the
[
General
]
tab, and then type the comment into the
[
Comment
]
box.
In the
[
Comment
]
box, type any comment on printers within 31 characters.
B Click the
[
NetBEUI
]
tab.
C Type the computer name into the
[
Computer Name
]
box.
•
In the
[
Computer Name
]
box, type the name that helps you to identify printers using the Net-
BEUI protocol. The factory default name consists of "RNP" and the last 3 bytes of the MAC
address on the Network Interface Board. For example, when the MAC address is
00:00:74:62:7D:D5, the factory default name is "RNP627DD5". A maximum of 13 charac-
ters consisting of uppercase English letters, numeric, or symbols (except "*+,/:;<=>?[\]|. and
space) can be used. No name is permitted if the prefix is "RNP". You must avoid the dupli-
cation of the same name on a network.
FFFF
Click
[
OK
]
.
The NIB Setup Tool exits, and the setting is transmitted to the printer.
GGGG
Exit SmartNetMonitor for Admin.