Ricoh MIB-II - Manual (Page 167)

Operating Instructions Administrator Reference
167
*1 Appears only when the optional 1394 Interface Unit is installed.
*2 Appears only when the optional 802.11b Interface Unit is installed.
❖ ❖ ❖ ❖ SSID
You can set for SSID in Infrastructure mode and 802.11 Ad hoc mode.
Limitation
❒ Select "¥" if you want to enter "/" in the SSID. Also, "¥" appears
when printing the configuration page, read it as "/".
Note
❒ The characters that can be used are ASCII 0x20-0x7e (32
bytes).
❒ A SSID value is set automatically to the nearest access point if
the setting has not been made.
❒ If the setting has not been made for 802.11 Ad hoc mode, the
same value as for Infrastructure mode or an "ASSID" value is
set automatically.
❖ ❖ ❖ ❖ WEP Setting
You can set the code for IEEE 802.11b.
Note
❒ Default: Not Active
❒ With a 64-bit WEP, you can use 10 digit hexadecimal. With a
128-bit WEP, you can use 26 digit hexadecimal.
USB Setting You can set the transmission speed for USB.
Note
❒ Default: Auto
Menu Description