Ricoh MIB-II - Manual (Page 185)

Operating Instructions Administrator Reference
185
TCP/IP address
Use the ifconfig command to configure TCP/IP (IP address, subnet mask, broadcast address, default
gateway address) for the machine.
❖ ❖ ❖ ❖ Reference
msh> ifconfig
❖ ❖ ❖ ❖ Configuration
msh> ifconfig interface_name parameter address
*1 If you did not enter the interface name, it will be automatically set to the Ethernet interface.
*2 Available when the optional 1394 Interface Unit is installed.
*3 You can specify an interface when installing the optional 802.11b Interface Unit.
Interface name Interface to be configured
ether
naf0
Ethernet Interface *1
ip1394 *2
fwip0 *2
IEEE 1394 Interface
wlan *3
wi0 *3
IEEE 802.11b Interface
Parameter Meaning
(no parameter) IP address
netmask subnet mask
broadcast broadcast address