Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 112
Operating Instructions
Administrator Reference
112
B Click the
[
IEEE 1394
]
, and then type the name into the
[
Device Name:
]
box when you change
the device name for IEEE 1394 (IP over 1394) interface.
•
In the
[
Device Name:
]
box, type the name of the printer within 13 characters. The factory de-
fault name consists of "RNP" and the last 5 bytes of the EUI-64 on the IEEE 1394 (IP over
1394) interface. For example, when the EUI-64 is 00:00:74:00:02:01:0A:66, the factory de-
fault name is "RNP0002010A66". No name of 13 characters is permitted if the prefix is
"RNP".
NetBEUI
A Click
[
NetBEUI
]
.
B Type the name into the
[
Computer Name
]
box and comment into the
[
Comment
]
box.
•
In the
[
Computer Name
]
box, type the name that helps you to identify printers using the Net-
BEUI protocol. The factory default name consists of "RNP" and the last 3 bytes of the MAC
address on the Network Interface Board. For example, when the MAC address is
00:00:74:62:7D:D5, the factory default name is "RNP627DD5". A maximum of 13 charac-
ters consisting of uppercase English letters, numeric, or symbols (except "*+,/:;<=>?[\]|. and
space) can be used. No name is permitted if the prefix is "RNP". You must avoid the dupli-
cation of the same name on a network.
FFFF
Click
[
Apply
]
.
The setting is transmitted to the printer.
GGGG
Exit the Web browser.