Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 78
Operating Instructions
Administrator Reference
78
FFFF
Type the device name into the
[
Device Name
]
box and comment into the
[
Comment
]
box as nec-
essary, and then click
[
Next
]
.
GGGG
Select the
[
NetWare
]
check box, and then click
[
Next
]
.
HHHH
Click to select
[
Bindery Mode
]
, type the file server name into the
[
File Server Name:
]
box, and
then click
[
Next
]
.
In the
[
File Server Name:
]
box, type the name of the file server in which a print server is to be created.
You can also select a file server from the list that appears by clicking
[
Browse
]
.
IIII
Type the print server name into the
[
Print Server Name
]
box, and the printer name into the
[
Printer Name
]
box, and the print queue name into the
[
Print Queue Name
]
box, and then click
[
Next
]
.
•
In the
[
Print Server Name
]
box, type the name of the NetWare print server within 47 characters.
•
In the
[
Printer Name
]
box, type the name of the NetWare printer.
•
In the
[
Print Queue Name
]
box, type the name of the print queue to be added to NetWare.
JJJJ
After confirming the settings, click
[
Next
]
.
The settings take effect, and the NIB Setup Tool exits.
KKKK
Exit SmartNetMonitor for Admin.
LLLL
Turn the printer power off and on.
Note
❒
To confirm that the printer is configured correctly, type the following from the command prompt.
F:> USERLIST
❒
If the printer works as configured, the name of the print server appears as an attached user.