Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 223
Operating Instructions
Administrator Reference
223
IEEE 802.11b <transmission mode> mode
This is the IEEE 802.11b transmission mode.
•
IEEE 802.11b
[
infrastructure
]
mode : in infrastructure
mode
•
IEEE 802.11b
[
802.11 ad hoc
]
mode : in 802.11 adhoc
mode
•
IEEE 802.11b
[
ad hoc
]
mode : in adhoc mode
IEEE 802.11b Tx Rate <Transfer Speed>
The IEEE 802.11b transmitting speed (set speed) is dis-
played.
(Example: Current Tx Rate is 11Mbps.)
IEEE 802.11b Tx Rate 11Mbps
inetd start.
An inetd has started.
<interface> started with IP: <IP address>
<IP address> has been set for <Interface> and <Inter-
face> started.
<Interface>: Subnet overlap.
Subnet from Netmask and the IP address you tried to set
for <Interface> overlap the subnet for another interface.
Set Subnet so that it does not overlap with another inter-
face.
IPP cancel-job: permission denied.
The printer could not authenticate the name of the user at-
tempting to cancel a job.
ipp disable.
Printing with ipp is disabled.
ipp enable.
Printing with ipp is enabled.
IPP job canceled. jobid=%d.
The spooled job has been canceled due to an error or by
user request.
Message
Description and Solutions