Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 40
Operating Instructions
Administrator Reference
40
B
Click the printer you want to use, and then click
[
OK
]
.
Note
❒
Printers that respond to an IP broadcast from the computer will be displayed. To print to a
printer not listed here, click [
Specify Address
], and then type the IP address or host name.
❒
You cannot add an address partially similar to that already used. For example, when
“192.168.0.2” is already used, “192.168.0.2xx” cannot be used. Similarly, when
“192.168.0.20” is already used, “192.168.0.2” cannot be used.
❖
❖
❖
❖ IPP
A
Click
[
IPP
]
.
The IPP setting dialog box appears.
B
To specify the IP address of the printer, type "http://printer's-ip-address/ printer" or
"ipp://printer's-ip-address/printer" in the
[
Printer URL
]
field.
(Example IP address is 192.168.15.16)
http://192.168.15.16/printer
ipp://192.168.15.16/printer
C
As necessary, type the names to distinguish the printer in
[
IPP Port Name
]
. Type a different
name from those of any existing port name.
If you omit this, the address typed in
[
Printer URL
]
will be set as the IPP port name.
D
If a proxy server and IPP user name are used, click
[
Detailed Settings
]
and configure the
necessary settings.
Note
❒
For more information about these settings, see SmartNetMonitor for Client Help.
E
Click
[
OK
]
.