Ricoh MIB-II - Manual (Page 77)

Operating Instructions Administrator Reference
77
Installing SmartNetMonitor for Admin
Install SmartNetMonitor for Admin on your computer. For the installation procedure, see p.94 “Install-
ing SmartNetMonitor for Admin” .
After installing SmartNetMonitor for Admin, go to p.77 “Setting Up as a Print Server” to use this com-
puter as a print server, or to p.79 “Setting Up as a Remote Printer” to use it as a remote printer.
Setting Up as a Print Server
AAAA
Log on to the file server as Supervisor or a Supervisor equivalent.
BBBB
Run SmartNetMonitor for Admin.
CCCC
Click the [ Group ] menu, and click [ Search Device ] , and then select [ IPX/SPX ] .
A list of printers appears
Note
❒ If you cannot identify which printer to configure from the list of printers, print Configuration Page
from the printer and find the desired printer. For more information about printing the Configura-
tion Page, see
p.130 “Printing a Configuration Page” .
❒ If no printer name appears on the list, match the frame types of the IPX/SPX protocol between
the computer and printer. Use the [
Network ] dialog box of Windows to change the frame type of
the computer. For more information about changing the frame type of equipment, see p.71 “Con-
figuring the NetWare Protocol using the Control Panel” .
DDDD
Select a printer you want to configure, and then click [ NIB Setup Tool ] on the [ Tools ] menu.
EEEE
Click to select [ Wizard ] , and then click [ OK ] .