Ricoh MIB-II - Manual (Page 36)

Operating Instructions Administrator Reference
36
Configuring a Windows XP computer
Follow these steps to configure a Windows XP computer to use the TCP/IP protocol.
AAAA
Click [ Start ] on the taskbar, point to [ Control Panel ] , and then click [ Network and Internet Con-
nections ] .
BBBB
Click [ Local Area Connection ] . On the [ File ] menu, click [ Properties ] .
CCCC
Confirm that "Internet Protocol (TCP/IP)" is selected in the [ Components checked are used by
this connection: ] box under the [ General ] tab.
Note
❒ If the check box for TCP/IP protocol is not selected, select the box.
❒ If the TCP/IP protocol is not installed, click [ Install ] under the [ General ] tab and install it. For more
information about installing the TCP/IP protocol, see Windows XP Help file.
DDDD
Configure the TCP/IP protocols with an appropriate IP address, subnet mask and other set-
tings.
Confirm with the network administrator that the settings are correct.