Changing port settings, Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 66
Operating Instructions
Administrator Reference
66
Changing Port Settings
Follow the steps to change SmartNetMonitor for Client settings, such as the proxy server settings or
IPP URL.
Note
❒
There are no settings for the NetBEUI protocol.
AAAA
From the
[
Printers
]
window, click the icon of the printer you want to use. On the
[
File
]
menu,
click
[
Properties
]
.
BBBB
Click the
[
Ports
]
tab, and then click
[
Configure Port
]
.
The
[
Port Settings
]
dialog box appears.
•
For TCP/IP protocol, you can configure Timeout Settings.
Note
❒
If you cannot set items on the [
Recovery/Parallel Printing
] tab, follow the procedure below.
A
Click [
Cancel
] to close the [
Port Configuration:
] dialog box.
B
Start SmartNetMonitor for Client, and then right-click the SmartNetMonitor for Client icon
on the taskbar.
C
Click [
Extended Features Settings
], and then select the [
Set Recovery/Parallel Printing for each
port
] check box.
D
Click [
OK
] to close the [
Extended Features Settings
] dialog box.
•
For IPP, you can configure User Settings, Proxy Settings and Timeout Settings.
Note
❒
For more information about these settings, see SmartNetMonitor for Client Help.